MX Dye Rainbow Tie Dyeing

Reactive MX Rainbow Tie Dyeing Instructions

Supplies...

Prepare The Soda Soak Solution...

    Step 1. The fabric may be soaked before or after tying.
    Step 2. In a plastic bucket dissolve ¾ cup (180 gr.) of Sodium Carbonate per gallon (4 liters) of warm water.
    Step 3. Place the fabric in the solution and soak for 20 minutes.
    Step 4. Remove the fabric, wring excess solution back into the container. The solution may be stored and reused.
    Step 5. Apply dye to damp fabric.

Ingredient Chart for 1/2 Cup (250 ml) of Dye

Color Depth

Dye Guide

Urea

Ludigol

Lukewarm Water

Pale

½  tsp.
(1.5 gr)

½ tsp.
(2.5 gr)

½  tsp.
(1.5 gr)

½  cup
(125 ml)

Medium

1 tsp.
(3 gr)

1 tsp.
(5 gr)

½  tsp.
(1.5 gr)

½  cup
(125 ml)

Deep

2 tsp.
(6 gr)

2 tsp.
(10 gr)

1 tsp.
(3 gr)

½  cup
(125 ml)

Black /Navy

4 tsp.
(12 gr)

4 tsp.
(20 gr)

1 tsp.
(3 gr)

½  cup
(125 ml)

Procedure for Direct Application...

    Step 1. Measure all the dry ingredients into a glass or plastic container.
    Step 2. Add the warm water, stir until dissolved. Solutions will store up to one week in the fridge, but are brightest for the first two days.
    Step 3. Apply the dye colours liberally to damp fabric using brushes, squeeze bottles or spray bottles.
    Step 4. Choose a fixation method, then wash the fabric, instructions following.

Fixation Methods...

    Method 1. Place the tied fabric in a plastic bag, seal. Leave 24-48 hours at room temperature or 4 hours near a radiator or other warm place.
    Method 2. Wrap the tied fabric in blank newsprint and steam 10 minutes in a vegetable steamer, make sure the water does not splash onto the fabric.
    Method 3. Wrap the tied fabric in blank newsprint and bake in an oven 5 minutes at 285º F (140º C).
    Method 4. Seal the wet tied fabric in microwave safe plastic or saran wrap, (may be sealed in a Pyrex bowl). Microwave on high about 5 minutes. Be sure the package stays sealed. Be sure all materials are microwave safe.

Washing Instructions...

    Step 1. Rinse the tied fabric well in cool water, continue rinsing while undoing the ties, then rinse until the water runs clear. Rinsing may be done in a washing machine.
    Step 2. Fill a basin with hot water and 1 tsp. (5 ml) of TNA detergent, continue washing and rinsing until the water runs clear. Hot water washing may be done by machine.
    Step 3. Dry the fabric, preferably in a dryer.

Back To Reactive MX Tie Dyeing Page

Back to Reactive MX Dyeing Instruction Main Page

To Top

Click here to locate Reactive MX in our catalogue

[Home] [Textile Art Catalogue] [Instruction Main Page] [Teacher's Corner] [Dye Instruction] [Fabric Paint Instruction] [Chemical Instruction] [Technique Instruction] [Project Instruction] [Books & Patterns] [Contact & Orders] [Gallery & Links]

Help line & local orders 604-929-4440 * Orders Toll-free 1-866-929-4440

Fax Orders 1-604-929-0252 * E-mail Orders orders@opulencesilksanddyes.com

Ask questions - Get Advice info@opulencsilksanddyes.com

Write to: 1428 Roxbury Road, North Vancouver, B.C., Canada V7G 1X7